Case Style # 1 Mineral Glass Top & Bottom | Case Style #1 comes with a plastic movement ring, which allows the case to used with the following ETA 11 1/2 ligne movements: 2836, 2846, 2824, 2804 and 2801. Customers have reported back that they had used this case for many other movements. We also know that the case and movement ring will work for the Tissot 2451, ST 97 & 96 and ETA 2750. The case is made of 100% stainless steel. Case diameter is 36 mm with a height of 10.80 mm. This case take a dial with diameter of 28.50 mm. Dial opening is 27.5 mm
Back side, showing a waterproof 5.5 mm crown and the plastic movement holding case ring.
Case diameter is 36 mm and takes dials with diameters of 28.0 to 28.7 mm. Dial opening is 27.5 mm. Crown diameter is 5.5 mm. The Watch Lug band lug size is 18 mm on this screw-back, 3 ATM water resistant case.
| |
CASE-1-MG $60.95 On Sale $54.95
|
Case Style # 1 Sapphire Glass Top & Bottom | Case Style #1 comes with a plastic movement ring, which allows the case to used with the following ETA 11 1/2 ligne movements: 2836, 2846, 2824, 2804 and 2801. Customers have reported back that they had used this case for many other movements. We also know that the case and movement ring will work for the Tissot 2451, ST 97 & 96 and ETA 2750. The case is made of 100% stainless steel. Case diameter is 36 mm with a height of 10.80 mm. This case take a dial with diameter of 28.50 mm. Dial opening is 27.5 mm.
Back side, showing a waterproof 5.5 mm crown and the plastic movement holding case ring.
Case diameter is 36 mm and takes dials with diameters of 28.0 to 28.7 mm. Dial opening is 27.5 mm. Crown diameter is 5.5 mm. The Watch Lug band lug size is 18 mm on this screw-back, 3 ATM water resistant case.
| |
CASE-1-SA $84.95 On Sale $77.00
|
Case Style # 1 Sapphire Glass with Anti-Reflective Coating | Case Style #1 comes with a plastic movement ring, which allows the case to used with the following 11 1/2 ligne movements: SELLITA SW210-1, SW200-1, SW220-1 also for all the ETA dash 1 and 2 versions of the following 2836, 2846, 2824, 2804 and 2801.
The case is made of 100% stainless steel. Case diameter is 36 mm with a height of 10.40 mm. Top crystal is 1.3 mm Thick Sapphire Glass Diameter 28.8 mm with Anti-Reflective coating on the underside. This case takes a dial with diameter of 28.50 mm and has a dial opening of 27.5 mm.
Back side, showing a waterproof 5.5 mm crown and the plastic movement holding case ring.
Case diameter is 36 mm and takes dials with diameters of 28.0 to 28.7 mm. Dial opening is 27.5 mm. Crown diameter is 5.5 mm. The Watch Lug band lug size is 18 mm on this screw-back, 3 ATM water resistant case.
| |
CASE-1-ARSA $89.95 On Sale $84.00
|
Case Style # 1 Sapphire Glass with Anti-Reflective Coating & Screwdown Crown | Case Style #1 comes with 1.3 mm thick top sapphire crystal with anti-reflective coating on the inside, 1.10 mm thick bottom sapphire crystal without anti-reflective coating, a plastic movement ring, which allows the case to used with the following ETA 11 1/2 ligne movements: 2836, 2846, 2824, 2804 and 2801. Customers have reported back that they had used this case for many other movements. We also know that the case and movement ring will work for the Tissot 2451, ST 97 & 96 and ETA 2750. The case is made of 100% stainless steel. Case diameter is 36 mm with a height of 10.80 mm. This case take a dial with diameter of 28.50 mm. Dial opening is 27.5 mm.
Back side, showing a waterproof screwdown 5.5 mm crown and the plastic movement holding case ring.
Case diameter is 36 mm and takes dials with diameters of 28.0 to 28.7 mm. Dial opening is 27.5 mm. Crown diameter is 5.5 mm. The Watch Lug band lug size is 18 mm on this screw-back, 3 ATM water resistant case.
| |
CASE-1-ARSASDC $102.95 On Sale $84.00
|
Stainless Steel 42 mm Cases, 10 ATM, to fit SELLITA & ETA 11 1/2 Ligne Movements
Stainless Steel Cases, 10ATM (330 ft/100 meters) Water Resistant, to fit the following popular Swiss Made Sellita SW200-1, SW210-1, SW220-1 and ETA 2801-2, 2804-2, 2824-2, 2836-2 movements.
|
45 mm Case #7 Sapphire Glass Front & Back fits ETA 6497 & 6498
|
45 mm See-thru back watch case made to fit ETA 6497 & ETA 6498 with sapphire glass on the front and back. Dial Diameter needed for this case is 37 mm and the case lug size is 22 mm. Dial opening is 36 mm. Stainless steel case is a screw off back and water-resistant.
| |
OFREI-CASE7 $119.00
|
$69.00 $56.95 On Sale!
45 mm Case #8 Mineral Glass Front & Back fits ETA 6497 & 6498
|
Mineral Glass on top and bottom are used on this 45 mm see-thru back watch case made to fit ETA 6497 & ETA 6498. Dial Diameter needed for this case is 37 mm and the case lug size is 22 mm. Dial opening is 36 mm. Stainless steel case is a screw off back and water-resistant.
| |
OFREI-CASE8 $69.00, Now on Sale! $56.95
|
Extra Long 20 mm Stem for ETA 2801-2
|
Also for ETA 2804-2, 2824-2, 2836-2, 2846 2821-2, 2824-A2, 2834-2, 2840, 2842, & 2846
Longines 633.5, 636.5, 639.2, 640.1, 641.1
| |
401/1543 $7.65
|
Square Dial Dots | Dial Dots are very popular tool used when doing Quartz Movement Exchanges and retrofitting watches. Use dial dots when, the dial feet have to be removed on the dial in order to use the same dial on a new movement that has feet in different locations.
| |
FB-DIALDOTSQUARE $4.95
|
Dials For TZWS Movements
|
Click Here For The Hands & Case Accessories Page
|
Click Here To View Our ETA 2824 & ETA 2836 Movements Selection
The ETA 2824 & 2836 join the list of popular yet hard to get ETA movements that can now come in different all the time. Our supply is always changing and adding a page just for these movements should help.
|
Leather Straps for the 18 mm lug size Case #1
|
Watch Hands for Unitas & ETA 6497 & 6498
|